GYMFORM ABS-A-Round PRO PLATINUM Manual De Instrucciones página 6

A Impulse
Program- width
me (µS) min.-
max.
1
2
100
3
4
5
120
6
7 100
8 100
9 100
(Mean values at 1 kΩ)
Power: 3 W
Number of channels: 3 channels
The load impedance range for this product is from 500 Ω to
20 kΩ.
Maximum current of the electrodes supplied: 120 mA (at 500
Ohm).
Dimensions: 92 x 82 x 33 mm (main unit).
Weight: 76 g (main unit without batteries).
This symbol indicates that the device is protected
against electrostatic discharge by BF-type double in-
sulation.
ISO 7000-1641 User Guide
CLEANING AND MAINTENANCE
DO NOT WASH THE GYMFORM® ABS-A-ROUND PRO
PLATINUM UNIT OR THE BELT: WIPE WITH A DRY OR
DAMP CLOTH.
Remove the batteries from your GYMFORM® ABS-A-
ROUND PRO PLATINUM if you do not plan to use it for an
extended period of time.
-6-
MAINTENANCE AND STERILIZATION OF ADHESIVE
Frequency Voltage
PADS
(Hz): min.- (V):
- Sterilize by wiping with wet fingers.
max.
- Do not immerse in water.
- Keep in a cool, dry place at room temperature.
- Do not remove the insulating label.
2
- After using the device, always replace the protective plastic
backings on the adhesive electrodes.
90
- Store in the bag supplied.
120
PRECAUTIONS WITH BATTERIES
37
90/120
Ensure the batteries are properly installed before turning the
unit on.
10
Turn off the unit to change the batteries.
Open the battery compartment using a Phillips screwdriver
50
(not included).
Remove the batteries if you are not going to use the device for
10
an extended period of time.
120
Take the necessary precautions when disposing of the batte-
ries. Do not expose them to fire.
3.3/10
DISPOSAL OF MATERIALS
dance with the corresponding local regulations.
Electrical and electronic devices contain hazardous substan-
ces that can have harmful effects on the environment and/or
human health and should be recycled properly.
The battery should be disposed of separately. To protect
the environment, all batteries, including rechargeable ones,
should not be disposed of as you would other household was-
te. Take them to a disposal centre and ensure it complies with
applicable legislation on battery disposal.
Quality Warranty:
This product is covered by a warranty against manufacturing
defects subject to the time periods stipulated by the legislation
in force in each country.
This warranty does not cover damages resulting from ina-
dequate use, negligent commercial use, abnormal wear and
tear, accidents or improper handling.
Australia & New Zealand only
This product has the benefit of certain Consumer Guaran-
tees. These are prescribed by the Australian Consumer Law
A symbol of a crossed-out wheeled bin means you
should find out about and follow local regulations
about disposing of this kind of product.
Do not dispose of this product as you would other
household waste. Dispose of this device in accor-
& the New Zealand Consumer Guarantees Act 1993 both of
which provide protection for consumers. There is no express
warranty for this product in Australia or New Zealand. The
above paragraph refers to other countries.
Made in China.