Home Decorators Collection 94469 Guía De Uso Y Mantenimiento página 12

Optional Installation - Installing the Light Kit to the Altura Fan
1
Removing the receiver from the
switch cup
□
Remove the two screws (KK save for later use) that hold the
receiver (NN) in place, and lift the receiver (NN) out of the
switch cup (E).
□
Hold the threaded retaining nut (JJ) with one hand and turn
the bottom cover (GG) counterclockwise with the other.
□
Remove the threaded retaining nut (JJ) from the switch cup
(E) and reattach it to the bottom cover (GG) (save).
NN
JJ
KK
GG
2
Wiring the light kit to the fan
□
Remove the lockwasher (WW) and hex nut (II) from the
threaded nipple of the light kit fitter assembly and save
them for later use.
□
Insert the black wire and the white wire from the light kit
through the center hole of the switch cup (E) one at a time.
□
Slide the ceiling fan switch cup (E) onto the threaded nipple
on the top of the light kit.
□
Insert the black wire and white wire through the lockwasher
(HH) and hex nut (II). Tighten them securely.
E
GG & JJ
(save)
12
LL
E
II
WW
A