Publicidad
2.6 Onboard Headers and Connectors
Serial ATA3 Connectors
(SATA_1_2: see p.1, No. 12)
(SATA_3_4: see p.1, No. 11)
(SATA_5_6: see p.1, No. 10)
(SATA_7_8: see p.1, No. 9)
USB 2.0 Headers
(9-pin USB6_7)
(see p.1 No. 19)
(9-pin USB8_9)
(see p.1 No. 18)
USB 3.0 Header
(19-pin USB3_2_3)
(see p.1 No. 7)
22
Onboard headers and connectors are NOT jumpers. Do NOT place
jumper caps over these headers and connectors. Placing jumper caps
over the headers and connectors will cause permanent damage of the
motherboard!
USB_PWR
P-
P+
GND
1
GND
P+
P-
USB_PWR
Vbus
IntA_PA_SSRX-
IntA_PA_SSRX+
GND
IntA_PA_SSTX-
IntA_PA_SSTX+
GND
IntA_PA_D-
IntA_PA_D+
These eight Serial ATA3
(SATA3) connectors support
SATA data cables for internal
storage devices. The current
SATA3 interface allows up to
6.0 Gb/s data transfer rate.
Besides four default USB 2.0
ports on the I/O panel, there
DUMMY
are two USB 2.0 headers on
this motherboard. Each USB 2.0
header can support two USB
2.0 ports.
Besides two default USB 3.0
Vbus
Vbus
IntA_PB_SSRX-
ports on the I/O panel, there is
IntA_PB_SSRX+
one USB 3.0 header on this
GND
IntA_PB_SSTX-
motherboard. This USB 3.0
IntA_PB_SSTX+
GND
header can support two USB 3.0
IntA_PB_D-
ports.
IntA_PB_D+
Dummy
1
Publicidad
