EN
to fit rider's height. When the bead goes into the hole, the height is fixed.
4.3. Close the lock buckle.
3.2 Charging the Battery
The packaging included a built-in lithium-ion battery. For the first time, you
must fully charge the battery. Be sure to charge the battery in a clean, dry
location.
Plug one end of the power cord into it. Plug the other end into a grounded AC
outlet. Do not disconnect the charger until the battery has been fully loaded.
3.3 Your Weight Must Be over 25kg
In order to guarantee your children's safety, everyone who drives must be
over 25kg in weight. If the driver's weight is lower than 25kg, the vehicle may
work improperly.
3.4 Battery Level
Battery level is displayed in the place, marked with the letter A in the Drawing
1B.
Sustained range will decrease during winter, because the battery perfor-
mance decreases quickly in cold conditions. In -15°, for example, battery per-
formance is only about half in comparison to that in room temperature. To
ensure battery life during the winter, it must be charged and unloaded at
least once a month.
WARNING: It will notify you when the battery level is critically low by slowing
down and shaking the wheels when you are riding it, if these warnings occur,
10
immediately slow down and safely step off. Turn the unit off. Do not attempt
to ride again until the battery is recharged.
4. RIDING GUIDE
4.1 Preparation
When you want to start your first ride, please try to wear comfortable casual
or sports outfit and wear flat shoes. Please bring it to a more spacious place,
and ensure that there aren't any significant obstacles. It is advisable to wear a
safety gear to insure risk against accidents.
4.2 Starting of a ride
Assembly and disassembly of the vehicle have been show in the previous
drawings. Prior to usage, make sure the locking mechanism has been fully
secured.
Step 1. Start the vehicle, pressing the power button (Drawing 1B: D). It will be
ready to use in a while.
Step 2. Place your feet properly down on the platform. Drive the vehicle,
maintaining the gravity center so to keep the balance. It is to be remembered
not to move your body in an abrupt manner.
Step 3. To accelarete press the trigger lever (Drawing 1A: B) down.
Step 4. To brake, press the trigger lever (Drawing 1A: E) down.
Step 5. Getting off the vehicle: prior to stepping down, the vehicle needs to
come to a halt.
WARNING: If scooter has both electric brake and rear physic brake, the elec-
tric brake is prior to rear brake, which is only used as auxiliary brake when
electric brake does not work properly. DO NOT step on rear brake for a long
time or it will break the tire and fender.
4.3 Terrain and Reminders
1. It is intended for indoors or use on smooth, flat surfaces. However, to pre-
vent loss of traction, you must always be careful when riding and learn to
identify and avoid slippery and wet surfaces, loose materials, slopes, potholes
and other obstacles.