Schön HD67526X-5101 Guía De Uso Y Mantenimiento página 8

Installation (continued)
13
Flushing and checking for
leaks
□
Ensure the faucet handle are in the off position,
and turn on the water supply and check for leaks.
If you discover any leaks, check your connections
to ensure they are installed properly.
□
Turn on the handle to allow the water to run for
at least one minute. This ushes away any
debris that could cause damage to internal parts.
□
Pull the spray hose (B) to its farthest extension
and point it down into the tub. Pull the lift rod (1)
up and rotate certain angle as shown to the full
ON position and ush water lines from the spray
hose (B) for one minute.
□
After ushing, turn the handle all the way off to
shut off the water. Rotate the lift rod (1) certain
angle in the same direction again to make it be
in its normal position.
B
1
14
Attaching the hand held
shower
□
Connect the hand held shower (A) into the end
of the spray hose (B) and hand tighten.
8
A
B