Publicidad
Specification
116
Ignition
Electronic
Spark plug
L8RTC
Drive train
Centrifugal
clutch
Max. engine
7.500 r.p.m.
speed
Engine idle
2800 r.p.m.
speed
Tool speed
8400 r.p.m.
Installation 116 / 116 B / 118 L /
118 B / 120 / 120 L
Mounting the guard
(Fig. 1)
Mounting the string head
1. Push the drive plate (2-2) onto the guide pin of
the drive shaft (2-1).
2. To lock it, insert the Allen key (2-6) into the hole
provided on the drive plate.
3. Mount the flange.
4. Push in the adapter (2-4) and screw it firmly in
place.
5. Screw the string head (2-5) onto the guide pin.
Caution: left-hand thread!
Mounting the additional guard for string
operation
(Fig. 4)
1. Click the black additional guard (4-1) into the
guard and fix it in place.
The integrated string cutter automatically shortens
the cutting string to the optimal length.
Mounting the cutting blade
1. Remove the black additional guard (Fig. 4-1).
2. Push the drive plate (3-2) onto the guide pin of
the drive shaft (3-1).
20
116 B
118 L
Electronic
Electronic
L8RTC
L8RTC
Centrifugal
Centrifugal
clutch
clutch
7.500 r.p.m.
10.000 r.p.m.
2800 r.p.m.
2800 r.p.m.
8400 r.p.m.
7800 r.p.m.
(Fig. 2)
(Fig. 3) (Fig. 4)
118 B
Electronic
L8RTC
Centrifugal
clutch
10.000 r.p.m.
2800 r.p.m.
7800 r.p.m.
3. Place the cutting blade (3-3) on the drive plate
(3-2) in such a way that the hole in the cutting
blade is exactly aligned with the guide circle of
the drive plate.
4. Push the flange (3-4) onto the cutting blade so
that the flat side faces the cutting blade.
5. Push on the protective cover (3-5).
6. Secure the clamping nut (3-7) on the guide
pin. To do this, insert the Allen key (3-8) into
the holes provided and tighten with the spark
plug socket. The spark plug socket is included
in the scope of supply. Caution: left-hand
thread!
Adjusting the shoulder strap
1. Push the shoulder strap over both shoulders.
2. 116 / 118 L / 120 L(Fig. 7): Hook the lock-
ing hooks into the eyelet (7-6).
116 B / 118 B / 120 (Fig. 10-6): Hook the
locking hooks individually into the strap attach-
ment bar.
3. Check the length of the shoulder strap by mak-
ing a number of swinging movements without
switching on the engine.
The string head or cutting blade must move par-
allel to the ground.
Caution!
Always use the shoulder strap when working with
the device.
Only hook up the shoulder strap once the engine
is started and idling.
Translation of the original operating instructions
120
120 L
Electronic
Electronic
L8RTC
L8RTC
Centrifugal
Centrifugal
clutch
clutch
9.500 r.p.m.
9.500 U / min
2800 r.p.m.
2800 U / min
7500 r.p.m.
7500 U / min
)
(Fig. 7
(Fig. 10)
Publicidad
