MODEL
POWER CONSUMPTION
RATED VOLTAGE
FREQUENCY
DIMENSIONS
SAFETY RULES
Attention!
Prior to use the toaster, please read this manual carefully. During operation, the
instructions should be kept in safety together with other instructions and manuals and
should be accessible for the personnel. To avoid personal injury and equipment damage,
all the following requirements and rules should be strictly met.
●
It is prohibited to change the toaster design.
●
It is prohibited to wash the toaster under running water or submerge it into the water.
●
Before using the toaster for the first time, unpack it, remove it from packing materials
and protective films and wash thoroughly according to cleaning instructions given
below.
INSTALLATION AND OPERATION
●
The supply mains voltage should correspond to the requirements given on the toaster
nameplate.
●
The toaster should be mounted on a flat level surface tolerant to its weight.
●
The toaster should not obstruct the people passway or block access to other equipment.
●
It is prohibited to use the toaster outdoors.
●
The surface on which the toaster is mounted should be heat resistant (for example,
made of stainless steel or special heat-resistant plastic).
●
The personnel should know that the toaster outer surfaces heat up during operation.
●
The toaster should be mounted in a well-ventilated room and protected from the
exposure of high temperatures and dirt.
●
It is necessary to ensure free air access to the front and rear panels of the toaster.
For safety reasons, the toaster control knobs and the power cord plug should always be
within reach.
TOASTER OPERATION
TECHNICAL DATA
HKN-LONG VV
1700 W
220-240V
50-60 Hz
362x502x330 mm
EN
7