Garden Treasures ALQ04110 Manual De Instrucciones página 4

ASSEMBLY INSTRUCTIONS
1. Attach a leg support bar (D) to the table leg (C) by
using a 1/4 in. x 22 mm bolts (AA) and washer (CC).
Guide the bolt through the hole in the table leg (C)
and into the pre-drilled hole in the leg support bar (D).
Hand tighten only. Repeat for the other three legs
and support bars.
Hardware Used
AA 1/4 in. x 22 mm Bolt
CC ø 6.5 x 1.0 mm Washer
2. Place the table rim (B) upside down on a flat, non-
abrasive surface. Attach a table leg (C) to the table
rim (B) by using three 1/4 in. x 18 mm bolts (BB)
and washer (CC). Guide the bolts through the holes
in the table leg and into the pre-drilled holes in the
table rim. Hand tighten only. Repeat for the other
three legs.
Hardware Used
1/4 in. x 18 mm Bolt
BB
ø 6.5 x 1.0 mm Washer
CC
3. Tighten all bolts using the hex bolt driver (EE).
Important note: Tighten each bolt a few revolutions
at a time. We recommend working in across corner
(X) fashion, alternating between bolts. This will
tighten the frame evenly by placing equal pressure
on all bolt joints. Do not overtighten. Cover all bolts
with covers (DD) provided.
Hardware Used
Bolt Cover
DD
4. With the help of another person, turn the table in the
upright position. Note the clear bumpers spaced
evenly throughout the inside of the rim. Carefully
place glass top (A) inside the table rim (B), resting
on the clear bumpers. Your table is now ready for
use.
1
x 4
x 4
x 12
x 12
x 16
Lowes.com/gardentreasures
4
AA
D
CC
C