Connection Process - PROZIS UBIQ HR Manual Del Usuario

EN EN
3. Follow the app's pairing instructions for your
new device (3).
3

CONNECTION PROCESS

1. Activate the BT and GPS on your smartphone.
2. Confirm the connection request on the App's
pop-up window.
3. Select the device name "Prozis Ubiq HR" from
the list of devices found.
14 14
4. Click "Ok" to complete the process.
The data sync process will begin.
Notes: During the pairing process, Prozis GO
App will prompt you to activate GPS and BT,
and to authorize Prozis GO to access to your
smartphone's GPS. Compatible iOS devices will
not prompt you with any information unless BT
pairing has been carried out successfully.
For future data synchronization, follow these steps:
Open the App > Swipe down > Sync prompt will
appear
DEVICE ACTIVATION & CHARGING
Make sure the smartwatch is working normally
before its initial use.
If using the smartwatch for the first time, connect
it to the charger. The device will automatically
boot up.
HOW TO WEAR IT
Wear the smartwatch snugly but comfortably on
your wrist, neither too tight nor too lose. Wear it
one finger away from your wrist.
EN
15