Master Trimmers MT Gentle 50 Manual De Uso Y Mantenimiento página 26

Identify the collection bag (J) and the ring (K) that is supplied closed
6
with the bag connector (K) already assembled. Separate one end
of the ring from one end of the connector and insert the free end
through the slit of the bag (J) until it makes a complete turn as
shown in the following image.
Place the collection bag, as shown in the following image, resting
8
the ring on the hooks of the barrel located in the lower part of the
body (A).
Connect the motor cable found in the container to the power
10
input located on the side of the machine body..
26
Rejoin the end of the ring with the connector and hide the
7
connector inside the slit of the bag.
K
J
Adjust the machine to the desired height, using the levellers (E)
9
Next, connect one end of the power cable (N) supplied to the
11
socket provided on the machine chassis, and the other end to the
mains.
IMPORTANT: Make sure that the electrical wiring is
perfectly positioned, without forming loops that could
cause tripping.
www.masterproducts.es