Publicidad
Idiomas disponibles
Idiomas disponibles
Caring for your YFliker
1.
After you have used the scooter for a week or two, the wheels will need to be checked
to ensure they are still in perfect working order. To do so rotate the bearings and wheels
and check if any lubrication or adjustments are needed.
2.
Please do not use plastic to cover your scooter if it is being stored or transported
as this may damage the finish. DO NOT use a wet cloth, alcohol, industrial cleaners
or solvents to clean the scooter as this may result in loss of gloss, the removal of decals
or dissolve the materials in the scooter. If the scooter loses its gloss a small bit of car wax
can be used to polish the scooter.
3.
In normal circumstances it is recommended that you disassemble, clean and lubricate
the scooter every 6 months.
Please take extreme care to ensure the scooter is reassembled correctly.
4.
If the front fork, wheels and/or rear support frame are not correctly tightened you can use
a wrench to tighten the bolts correctly. Please ensure to not over or under tighten the bolts.
5.
Due to normal wear and tear the PU wheels and bearings may need to be replaced after
some time. Please contact the place of purchase for new wheels. DO NOT use parts de-
signed for other scooters, the use of anything other than Fliker parts may affect your safety.
6.
If the brake cable becomes lose, please screw out the bolt and nut on the brake gear and
pull the brake cable out with a clamp. Reposition the brake cable so that it is tense and
screw the bolt and nut onto the brake gear all the while keeping the cable taut.
7.
Over time the nuts and bolts may become loose, please check that all nuts and bolts
are sufficiently tightened before each use of your scooter.
8.
The self-locking nuts and other self-locking elements can lose their effectiveness if released.
NOTE:
Please read this manual carefully and keep it for future reference. The dealer
will not take responsibility if the scooter is used in a manner for which is was not intended
or if all warnings which are stated in the manual are not followed.
IMPORTANT NOTICE TO PARENTS
This manual contains important information relating to your child's safety, it is your responsibility
to review this information with your child and make sure they are fully aware of all the information
and warnings within the manual. Please carefully read this manual before you commence assembly
of this scooter and review this information with young riders before they ride.
WARNING!
Like any moving product, scooters can be dangerous if due care and attention is not paid. Be sure
to read the manual before going on your scooter. In particular pay attention to the following:
1
Read the information supplied by the manufacturer.
2
User's max weight: 80kg for Class A.
3
Wear personal protective equipment such as a helmet, knee pads and elbow pads.
4
Always wear a helmet when riding your scooter and keep chinstrap securely buckled.
5
Always wear closed toe shoes when riding
6
Avoid streets and surfaces with water, sand, gravel, dirt, leaves, and other debris.
Wet weather impairs traction, braking and visibility.
7
Avoid sharp bumps, drainage grates and sudden surface changes.
Scooter may suddenly stop.
8
Ride on smooth, paved surfaces away from motor vehicles.
9
Not to be used on public highways or in traffic.
EN
Publicidad
