Publicidad
Idiomas disponibles
Idiomas disponibles
Step 5. Assemble the
5
6
nozzle head back to your
nozzle kit.
Step 6. Light ring can
use in or out of the water,
adjust the light ring up
and down to the desire
location.
Step 7. Connect the
light ring to the sensor by
pushing the plug into the
7
sensor socket until it is
firmly seated. Hand tighten
the nut from the plug to the
socket.
Step 8. Connect the
sensor to the transformer
8
by pushing the plug into the
transformer socket until it is
firmly seated. Hand tighten
the nut from the plug to the
socket.
Step 9. Make sure that the
transformer and sensor
9
are NOT submerged. Make
sure that the light sensor
faces up.
NOTE: At night, the lights
will automatically turn on.
At sunrise, they will automatically
10
turn off.
Step 10. Plug the transformer
into a properly grounded electrical
outlet
8
Publicidad
