Setting The System - Sherwood RD-6506 Instrucciones De Funcionamiento

RD-6506(A)_ENG_110408_RD-6506(A)_ENG 2011-04-11 오전 11:41 페이지 30

SETTING THE SYSTEM

• SW M(SUBWOOFER MODE) : To select the desired subwoofer mode.
• TONE : To adjust the tone (bass and treble) as desired.
• A.P.S(AUTO POWER SAVE) : To set the power-off time as desired.
• RETURN : To return to the previous menu.
1.
Press the CURSOR UP(▲)/DOWN(▼) buttons
to select the desired item.
When selecting the SUBWOOFER MODE
• "SW ＋" mode is effective only when "F"(Front) and "C"(Center) are set to "LARGE" and "SW"(Subwoofer) is set to "YES" on
the SPK SET menu. (For details, refer to "SETTING THE SPEAKER SETUP" on page 33.)
NORM : When the low frequency signals of channels set to "LARGE" are reproduced from those channels only.
In this mode, the low frequency signals that are reproduced from the subwoofer channel is only the low frequency
↕
signals of LFE (from the multi-channel sources that contains LFE (Low Frequency Effects) channel, also called the ".1"
channel) and the channels set to "SMALL".
SW ＋: When the low frequency signals of channels set to "LARGE" are reproduced simultaneously from those channels and
the subwoofer channel.
In this mode, the low frequency range expands more uniformly through the room, but depending on the size and shape
of the room, interference may result in a decrease of the actual volume of the low frequency range.
When selecting the AUTO POWER SAVE
• The auto power save is a function that automatically turns the power off to enter the standby mode. When any button is not
pressed for more than the time you set, it will function.
• You can set the power-off time as desired.
→
OFF
(To turn off the function)
SW M : NORM / SW +
TONE : OFF
A.P.S : OFF / 2H / 4H / 6H
RETURN
↔ 2H(Hour) ↔ 4H ↔ 6H ←
/ ON
BASS : 0 / - 10 ~ + 10
TRE : 0 / - 10 ~ + 10
2.
Press the CURSOR LEFT(◀)/RIGHT(▶)
buttons to set the selected item as desired
30