Recalling The Memorized Channel Levels - Sherwood RD-6506 Instrucciones De Funcionamiento

RD-6506(A)_ENG_110408_RD-6506(A)_ENG 2011-04-11 오전 11:41 페이지 38
Memorizing the adjusted channel levels
• You can memorize the adjusted channel levels into preset
memory("REF 1", "REF 2") and recall the memorized
whenever you want.
1.
After performing the steps 1 ~ 3 in "Adjusting the
current channel level" procedure on page 37,
press the ENTER button.
• Then "1" of "REF 1" indication flickers.
2.
Press the CURSOR LEFT(◀)/RIGHT(▶)
buttons to select the desired preset memory,
then press the ENTER button.
• Each time the CURSOR LEFT(◀) or RIGHT(▶) button is
pressed, "REF 1" or "REF 2" is selected.
• The adjusted channel levels have now been memorized
into the selected memory.

Recalling the memorized channel levels

1.
Press the CURSOR UP(▲)/DOWN(▼) buttons
to select the "MODE ~ ".
• "CAL" may be displayed instead of "REF 1" or "REF 2".
2.
Press the CURSOR LEFT(◀)/RIGHT(▶)
buttons to select the desired one of REF 1 and
REF 2.
• Then the channel levels memorized into the selected
preset memory are recalled.
38