Mounting - Tripp-Lite SmartPro 1U Serie El Manual Del Propietario

Mounting

Mount your equipment in either a 4-post or 2-post rack or rack enclosure. The user must
determine the fitness of hardware and procedures before mounting. If hardware and procedures
are not suitable for your application, contact the manufacturer of your rack or rack enclosure. The
procedures described in this manual are for common rack and rack enclosure types and may not
be appropriate for all applications.
4-Post Rack Mounting
UPS models include hardware required to mount in a 4-post rack.
1
Attach mounting ears
mounting holes of your equipment
the screws provided
face forward.
2
Using an assistant if necessary, lift your
equipment and mount it to the rack. Attach
it by screwing the appropriate hardware
through its mounting ears and into the rack
rails.
2-Post (Telecom) Rack Mounting
Following the procedures below, mount the 1U UPS model in 2-post racks with the included
hardware.
1
Attach mounting ears
mounting holes of your UPS
screws provided
backward.
2
Using an assistant if necessary, lift your UPS
and attach it to the rack by passing the
screws, nuts and washers provided
through its mounting ears and into the rack
rails.
to the front
A
using
B
. The ears should
C
to the front
A
using the
B
. The ears should face
C
D
B
1
D
D
2
B
1
D
D
2
3
A
D
A
C
C