Publicidad
Idiomas disponibles
Idiomas disponibles
GENERAL SAFETY wARNINGS
■ b. Do not use the power tool if the switch does not turn
it on and off. Any power tool that cannot be controlled
with the switch is dangerous and must be repaired.
■ c. Disconnect the plug from the power source and/or
the battery pack from the power tool before making
any adjustments, changing accessories, or storing
power tools. Such preventive safety measures reduce
the risk of starting the power tool accidentally.
■ d. Store idle power tools out of the reach of children
and do not allow persons unfamiliar with the power
tool or these instructions to operate the power tool.
Power tools are dangerous in the hands of untrained
users.
■ e. Maintain power tools. Check for misalignment
or binding of moving parts, breakage of parts and
any other condition that may affect the power tools
operation. If damaged, have the power tool repaired
before use. Many accidents are caused by poorly
maintained power tools.
■ f. Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges are
less likely to bind and are easier to control.
■ g. Use the power tool, accessories and tool bits
etc. In accordance with these instructions, taking
into account the working conditions and the work to
be performed. Use of the power tool for operations
different from those intended could result in a
hazardous situation.
BATTERY TOOL USE AND CARE
■ a. Recharge only with the charger specified by the
manufacturer. A charger that is suitable for one type
of battery pack may create a risk of fire when used
with another battery pack.
■ b. Use power tools only with specifically designated
battery packs. Use of any other battery packs may
create a risk of injury and fire.
■ c. When battery pack is not in use, keep it away from
other metal objects, like paper clips, coins, keys, nails,
screws, or other small metal objects, that can make a
connection from one terminal to another. Shorting the
battery terminals together may cause burns or a fire.
■ d. Under abusive conditions, liquid may be ejected
fromthe battery; avoid contact. If contact accidentally
occurs, flush with water. If liquid contacts eyes,
additionally seek medical help. Liquid ejected from
the battery may cause irritation or burns.
SERVICE
■ a. Have your power tool serviced by a qualified repair
person using only identical replacement parts. This
will make sure that the safety of the power tool is
maintained.
ADDITIONAL POwER TOOL SAFETY wARNINGS
wARNING
Additional safety instructions for pole pruners.
The intended use is described in this instruction manual.
Do not use the tool for purposes not intended; for
example do not use the tool to fell trees. The use of any
accessory or attachment or performance of any
operation with this tool other than those recommended
in this instruction manual may present a risk of personal
injury.
■ Hold power tool by insulated gripping surfaces when
performing an operation where the cutting tool may
contact hidden wiring or its own cord. Contact with
a "live" wire will also make exposed metal parts of
the power tool "live" and give the operator an electric
shock.
■ Wear close fitting and protective clothing including
a safety helmet with visor/goggles, ear protectors,
non-skid safety footwear, protective bib trousers and
strong leather gloves.
■ Always position yourself out of the path of falling
branches.
■ The safe distance between a branch to be felled and
bystanders, buildings and other objects is at least 2
1/2 times the length of the branch. Any bystander,
building or object within this distance is at risk from
being struck by the falling branch.
■ Pre-plan a safe exit from falling trees or branches.
Ensure the exit route is clear of obstacles that would
prevent or hinder movement. Remember wet grass
and freshly cut bark is slippery.
■ Ensure someone is nearby (but at a safe distance) in
case of an accident.
■ Do not use the tool while standing in a tree, on a
ladder or on any other unstable surface.
■ Keep proper footing and balance at all times.
■ Hold the tool firmly with both hands when the motor
is running.
■ Do not let the moving chain contact any object at the
tip of the guide bar.
■ Start cutting only with the chain moving at full speed.
■ Do not attempt to enter a previous cut. Always make
a fresh cut.
■ Watch for shifting branches or other forces that could
close a cut and pinch or fall into the chain.
■ Do not attempt to cut a branch when the diameter of
the branch exceeds the cutting length of the tool.
■ Always remove the battery from the tool and place
the chain cover over the chain when storing or
transporting the tool.
■ Keep the saw chain sharp and properly tensioned.
Check the tension at regular intervals.
■ Switch the tool off, allow the chain to stop and remove
the battery from the tool before carrying out any
adjustment, servicing or maintenance.
■ Only use genuine replacement parts and accessories.
■ Carry the pole pruner by the handle with the cutter
blade always fit the cutting device cover and
dismantle it into its component parts. Proper handling
of the pole pruner will reduce possible personal injury
and injury to others.
2
EN
Publicidad
