Fellowes Lotus DX Manual Del Usuario página 5

STEP 2C
The rear USB ports are meant for data transfer devices. Plug your mouse
and keyboard into the rear USB hub and route the remaining cords
through the cord funnel.
STEP 3
Gather all cords, including the monitor cords. Apply the cable zip using the provided tool.
STEP 4
Slide the end of the cable zip into the cord funnel to lock into place.
TENSION ADJUSTMENT
Patent pending Smooth Lift Technology™ makes it effortless to raise and lower your sit-stand. Place items onto the workstation and raise up to the
highest position. Lotus is shipped at the lowest setting which will help offset 10lbs/4.5kg. Turn the knob clockwise to offset heavier weights, up to 29
full rotations to offset 35lbs/15.8kg. As a guideline, approximately 10 full rotations are needed to offset a dual monitor setup. The exact number of
rotations depends on your personal comfort. Once you have properly adjusted the Lotus, it should feel effortless to raise and lower.
Push the Cable Zip upward
into the Cable Zip Tool.
Pull down on the Cable Zip tool while
holding the top of the Cable Zip.
5