Leister TRIAC AT Manual Del Usuario página 21

Please read operating instructions carefully before useand
keep for future referen
Warning
DANGER! Danger when opening up the tool, as live components and connections
are exposed. Therefore, before opening it, unplug the tool to ensure disconnec-
tion from the mains.
Incorrect use of the hot air tool (eg overheating of the material) can present
a fire and explosion hazard, especially near combus t ible materials and
explosive gases.
Do not touch the heating element housing, air nozzle and discharging
plastizised material when they are hot as they can cause burns. Let the
tool cool down. Do not point the hot air flow and the discharg ing plasti-
zised material in the direction of people or animals.
Caution
120
The voltage rating stated on the tool must correspond to the mains voltage.
230
FI
For personal protection on building sites we strongly recommend the tool
be connected to a RCCB (Residual Current Circuit Breaker) .
The tool must be operated under supervision. Heat can ignite flammable
materials which are not in view.The machine may only be used by qua-
lified specialists or under their supervision. Children are not authorized
to use this machine.
Protect tool from damp and wet.
Repairs should only be carried out by authorized Leister service points.
Restricted to use with original Leister accessories and replacement parts.
Translation of the Original User Manual Translation of the Original User Manual Translation of the Original User Manual
Warranty
• For this tool, the guarantee or warranty rights granted by the relevant distri-
butor/seller shall apply. In case of guarantee or warranty claims any manu-
facturing or workmanship defects will either be repaired or replaced by the
distributor at its discretion. Warranty or guarantee rights have to be verified by
an invoice or a delivery document. Heating elements shall be excluded from
warranty or guarantee.
• Additional guarantee or warranty claims shall be excluded, subject to mandato-
ry provisions of law.
• Warranty or guarantee shall not apply to defects caused by normal wear and
tear, overload or improper handling.
• Warranty or guarantee claims will be rejected for tools that have been altered
or changed by the purchaser.
Conformity
Leister Technologies AG, Galileo-Strasse 10, 6056 Kaegiswil/Switzer-
land, confirms that this product, in the version as brought into circulation
through us, fulfils the requirements of the following EC directives.
Directives:
Harmonized
Standards:
Kaegiswil, 23.10.2017
Bruno von Wyl, CTO
Disposal
2006/42, 2011/65, 2014/30, 2014/35
EN 12100, EN 55014-1, EN 55014-2, EN 61000-6-2,
EN 61000-3-2, EN 61000-3-3, EN 62233, EN 60335-1,
EN 60335-2-45, EN 50581
Electrical equipment, accessories and packaging should be recycled in an
environmentally friendly way. For EU countries only: Do not dispose of electri-
cal equipment with household refuse!
Deutsch Deutsch
English English
Français
Español
Português
Italiano
Nederland
Dansk
Svenska
Norsk
Suomi
Eλληνικά
Türkçe
Polski
Magyar
Cesky
Slovensky
Românã
Slovensko
Български
Eesti
Christoph Baumgartner, GM
Lietuviu
Latviešu
Русский
日本語
中文
한국어
21 21