Hints On Disposal; Declaration Of Conformity - oneConcept 10030880 Manual De Instrucciones

Cleaning and Care
• Always remove the plug from the socket-outlet and allow the fan blower to stop acting before clean
it.
• Clean the external surfaces of the unit with a soft damp (not dripping wet) cloth.
• WARNING: Do not immerse the unit in water.
• Do not use any cleaning chemicals such as detergents and abrasives.
• Do not allow the interior (special for the PCB) to get wet as this could create a hazard.
• After extended periods of use, be sure to replace the water in the tank with fresh clean water at
least weekly. Also remember to clean the fi lter by unscrewing the fi lter and removing the fi lter
cradle. It should be cleaned in a mild soapy solution and then left to dry before replacing the fi lter.
• When the unit is not in use, make sure that it is unplugged from the wall socket, water is drained
thoroughly and it is placed back into its original box for storage until later use.
• In case of malfunction or doubt, do not try to repair the fan yourself, it may result in a fi re hazard
or electric shock.
According to the European waste regulation 2012/19/EU this symbol on the product
or on its packaging indicates that this product may not be treated as household was-
te. Instead it should be taken to the appropriate collection point for the recycling of
electrical and electronic equipment. By ensuring this product is disposed of correct-
ly, you will help prevent potential negative consequences for the environment and
human health, which could otherwise be caused by inappropriate waste handling of
this product. For more detailled information about recycling of this product, please
contact your local council or your household waste disposial service.
Producer: Chal-Tec GmbH, Wallstraße 16, 10179 Berlin, Germany.
This product is conform to the following European Directives:
2014/30/EU (EMC)
2014/35/EU (LVD)
2011/65/EU (RoHS)
206/2012/EU (ErP)

Hints on Disposal

Declaration of Conformity

11