Heco DIREKT El Manual Del Propietario página 8

hOw TO AVOID DAMAGE TO YOuR VAluABlE sPEAKERs
All HECO loudspeakers are designed and built for optimum sound reproduction with the tone
controls in the central position – i.e. with "linear" amplifier output. Turning up the bass and treble
controls too far delivers more power to the woofers and/or tweeters, and at high volumes this can
actually destroy the speaker units!
If the output of your amplifier is significantly higher than the rated power handling capacity of your
speakers extremely high volumes can physically destroy your speakers. This doesn't actually
happen often but you should be aware that it is possible.
Weak amplifiers with low output ratings can actually be more dangerous for your speakers at
medium volumes because weak amplifiers may overload much faster than powerful ones and this
causes measurable and audible distortion, which is extremely dangerous to your loudspeakers.
Always turn the volume down immediately as soon as you hear distortion! If you like listening to loud
music make sure that your amplifier can deliver at least as much power as the speakers' power-
handling rating.
ThE sOunD YOu CAn'T hEAR...
Amplifiers, tuners and CD players can all produce inaudible high-frequency signals – and this
doesn't only apply to cheap products. If your tweeters fail at low or medium volumes you should
have a qualified technician check your system components for dangerous inaudible signals.
sPECIfICATIOns
Configuration:
Power-handling capacity:
Impedance:
Frequency response:
Recommended amplifier output: 10 – 320 W
Efficiency (1W/1m):
Dimensions (WxHxD):
Weight:
Accessory:
Subject to technical change.
2-way bass reflex
200 / 320 W
4 – 8 ohms
25 – 28 000 Hz
95 dB
440 x 998 x 397 mm (including feet)
25.8 kg
3 metal feet, 3 adjustable spikes
8