Trouble Shooting - SATA AE1032H Manual De Instrucciones

17. TROUBLE SHOOTING

Turntable will not turn
Power cord conductor shorting to ground.
• Check the wiring.
Motor shorted.
• Replace the motor.
• Replace motoinverter circuit board.
• Check pedal board micro.
Belt broken.
• Replace belt.
Rotation control pedal fails to return to central position
Control spring broken.
• Replace the control spring.
Bead breaking unit not working
No vertical movement.
•Check for folded hoses.
•Check ascent and descent valve operation.
Bead breaking unit is underpowered, does not break the
bead and is leaking air
Carry out the checks in the previous point: "Bead breaking
unit not working". Cylinder gaskets worn.
• Replace gaskets.
• Replace bead breaker cylinder.
Bead breaker cylinder leaks air around the rod
Air gaskets worn.
• Replace gaskets.
• Replace bead breaker cylinder.
Gear unit noisy. The table top makes 1/3 of a spin and then
stops
Gear unit seizing.
• Replace gear unit.
Table top fails to clamp rims
Handle engagement unit faulty.
• Check it is synchronised properly.
• Replace the plate of the turntable.
• Check there are no burrs.
• Replace the locking handle.
Table top mounts or demounts wheels with difficulty
insufficient belt tension.
• Adjust tension or replace belt.
AE1032H
Vertical head does not raise or does it too far from rim
Clamping plate not adjusted.
• Adjust plate.
• Restore setting.
The vertical head holder arm has difficulty rising
Defective clamping plate.
• Replace plate.
Clamping plate not adjusted.
• Adjust plate.
Vertical and horizontal limit stops do not operate
No air passing through clamping handle / valve.
• Check hose circuit.
• Replace handle / valve.
Column does not tilt
Column tilting cylinder faulty.
• Replace column opening cylinder.
No air supply to cylinder.
• Hoses folded.
• Replace valve.
• Check tightness of arm pivot.
Clamping arm cylinders leak air
Faulty piston or gaskets.
• Replace pistons and gaskets.
Column tilts violently or too slowly
Incorrect release valve setting.
• Adjust air delivery regulators on control valve.
Tyre pressure gauge needle fails to return to 0
Pressure gauge faulty or damaged.
• Replace pressure gauge.
Wheel lifter not working
Control out of operation.
• Check pedal board.
Rises slowly or has insufficient force.
• Check for folded hoses.
• Adjust delivery on pedal board.
• Replace the valve on the lifter pedal control board.
Cylinder leaking air.
• Replace cylinder gaskets.
• Replace cylinder.
84
- 03 -
EN DE RU KO PT JA ES