LaserLiner MultiMeter-PocketBox Manual De Instrucciones página 10

Read the operating instructions and the enclosed
!
brochure „Guarantee and additional notices"
completely. Follow the instructions they contain.
Safely keep these documents for future reference.
Function/Application
Multimeter for taking measurements in the range of overvoltage
category CAT II up to max. 250 V. The meter can be used to
measure DC and AC voltages and direct and alternating currents
testing.
Symbols
Hazardous electrical voltage warning:
Unprotected live components inside the device
housing may pose a risk of electric shock.
Danger area warning
Protection class II: The test device has
reinforced or double insulation.
Overvoltage category II: Single-phase consumers that
are connected to standardsockets, e.g. household
appliances, portable tools.
Safety instructions
• In overvoltage category II (CAT II), the voltage between the test
device and earth must not exceed 250 V.
• Before measuring or checking the resistance, continuity, diodes or
capacitance, disconnect the power supply to the electric circuit.
Check that all high-voltage capacitors are discharged.
• Before measuring or checking the resistance, continuity or diodes
disconnect the power supply to the electrical circuit. Make sure
that all high-voltage capacitors are discharged. To check,
remove the measuring leads of the device from the test piece
before changing the mode.
10
GB