Sauder Office Port 408293 Manual De Usuario página 20

Step 16
Flip the drawer over onto the LEFT DRAWER SIDE (D88).
å
Insert a SLIDE CAM (Y) into theRIGHT DRAWER SIDE (D87).
å
Diagram 1. Insert the tabs on a DRAWER ACTUATOR (EE)
å
into the slots in a EXTENSION SLIDE (R). You may need to
insert one tab fi rst, then the other.
Diagram 2. Visually check that the DRAWER ACTUATOR (EE)
å
is seated in the EXTENSION SLIDE (R).
Diagram 3. If the DRAWER ACTUATOR is not seated, use
å
your hammer to gently tap the SLIDE until the tabs are
properly seated in the slots.
Now, fasten this EXTENSION SLIDE (R) to the RIGHT
å
DRAWER SIDE (D87). Use two GOLD 5/16" FLAT
HEAD SCREWS (LL).
Repeat steps 15, 16 and 17 for the other drawer.
å
LL
GOLD 5/16" FLAT HEAD SCREW
(4 used in this step)
2.
Page 20
D87
Post
R
Seated
EE
Open end
R
D88
3.
EE
408293
Slot
R
1.
EE
These tabs must insert into the slots.
Screw head - turn CAM to line
up the hole in the SLIDE with
the hole in the DRAWER SIDE.
Y
(2 used)
www.sauder.com/services