Self-Diagnosis; Spare Parts; Disposal Information - Renfert SILENT powerCAM EC Guia De Inicio Rapido

Self-diagnosis

The self-diagnosis helps the control system to check the function of the turbine and electronic parts.
If no fault is detected, the suction is ready for operation after the self-diagnosis has finished. If an error is
detected, this is indicated with a signal.
The self-diagnosis is started manually and is carried out once.
⇒ Press the operating mode key (21) 3 seconds.
♦ flashes
⇒ Press the enter key (25).
♦ Blinks: self-diagnosis is carried out.
No error detected:
♦ Suction is on standby.
Error detected:
♦ An audible signal can be heard.
♦ All displays are alight.
⇒ For troubleshooting, see the complete instructions in the Internet.

Spare Parts

You can find components subject to wear and the spare parts on the spare part list
in the internet at www.renfert.com/p918.
Enter the following item number: 29390000.
The components excluded from the warranty (such as consumables or parts subject
to wear and tear) are marked on the spare part list.

Disposal Information

Within the European Union, units with this symbol should not therefore be disposed of in unsort-
ed domestic waste.
Please contact your local authorities for more information on proper disposal.
- 7 -
EN
21 25
Subject to change