Brandson 305385 Manual Del Usuario página 37

Note: If the German signal tower diameter of 1500 KM or more is ex-
ceeded, the reception signal of the wireless clock is very poor. In such
cases it is advisable to switch OFF the wireless clock function.
7.1 DCF signal search (radio clock)
After the weather station has searched for the radio sensor after swit-
ching on (up to 3 minutes), it automatically enters the DCF search mode.
The weather station automatically searches for the DCF signal for 7
minutes, the DCF signal symbol flashes and the background lighting swit-
ches off automatically. If you want to search for the DCF signal manually,
press and hold the „UP/TEMP"(
search mode. Again, the longest search is 7 minutes.
8. Alarm setting
1. Press the "ALARM" button in normal mode to display the alarm time
1. When the alarm time 1 is displayed, press the "ALARM" button
again to display alarm time 2. Press the button a third time to return
to the normal mode.
2. If the alarm time is displayed, please press the "SETTINGS" button to
enable the alarm function.
You hear an alarm if the time reaches the set alarm time.
Note: When the alarm 1 or alarm 2 function is activated, the "
" symbol is shown on the display.
Note: You can exit the display mode at any time by not pressing any but-
ton for 20 seconds or by touching the Snooze/Sleep button "
Setting the alarm
Press and hold the "ALARM" button for 3 seconds to enter the alarm and
snooze setting mode.
Press the "UP/TEMP" (
it to adjust the value.
Press the "ALARM" button and release it to confirm the setting and to go
to the next menu item.
English
) button for 3 seconds to activate the
) or "DOWN/WIND" (
" or "
) button and release
".
37