Set-Up And Installation - Cameo MOVO BEAM 200 Manual Del Usuario

SET-UP AND INSTALLATION

Four rubber feet on the underside of the base of the device ensure that it can be securely placed
on suitable surfaces while at the same time protecting the surface from scratches. For traverse
mounting, use the two Omega brackets supplied, which you attach to mounting points A, and
use optionally available and suitable traverse clamps. Ensure secure connections and secure the
spotlight with a suitable safety cable at the intended securing point B.
HAZARD: Overhead mounting requires extensive experience, including the calculation of
the limit values for load, the installation materials and regular safety inspection of all
installation materials and spotlights. If you do not have these qualifications, do not
attempt to perform an installation yourself. Refer instead to a qualified professional.
There is a risk that devices that are incorrectly mounted and secured may come loose
and fall down. This can cause serious injury or death.
24
A
A
B