Be Cool ultimate Manual Del Usuario página 19

ASSEMBLY AND USE INSTRUCTIONS
1. FRAME EXPANSION OPERATION
Dial out the hook to unlock the frame with single index
finger,then expanse the frame, 1
One hand hold and pull the handle up to straighten, hear
"click" to finish , 1.a
2. FRAME FOLDING OPERATION
One hand slide the second lock button to the right and then
press the folding button and pinch it up, 2
Pinch the handle assembly (unlocked) with one hand and
push it forward to the front foot tube, 2.a
Lift up to the ceiling with the middle of the hand strap, 2.b
Grab the hand strap and shake it gently until the folding hook
is automatically hung, 2.c
3. FRONT WHEEL INSTALLATION
Hold the front foot with right hand, hold the front wheel set
with left hand and pile up , hear "click" to finish installation, 3
Hold the front wheel set with right hand, press the quick
release button with your left finger then pull down to remove
the front wheel, 3.a
Press up the front wheel orientation to release the orientation,
the front wheel can be rotated 360 degrees, 3.b
Press down the front wheel orientation to straight forward and
non-rotatable, 3.c
4. REAR WHEEL INSTALLATION, BRAKE FUNCTION
Take the rear wheel assembly with your left hand and take the
frame assembly with your right hand. Align the shaft hole and
push it forward ,hear"click" to complete the assembl, 4
Hold the rear wheel assembly in one hand, pull down the quick
release button with the other hand and pull out to remove the
rear wheel set, 4.a
Step the brake pedal down with one foot to brake, 4.b
Push the brake pedal up with one foot to unlock the brake, 4.c
5. FOOTREST OPERATION
Simultaneously press and hold on both sides of the footrest
bend button, flip up to adjust the appropriate height, 5 / 5.a
Simultaneously press and hold on both sides of the footrest
bend button, flip down to lower the angle, 5.b
6. SAFETY BUCKLE INSTALLATION
Snap the buckles on both sides to the middle button to install
it, 6
Press and hold the safety hook to buckle over the buckle, 6.a
Adjust the length of safety belt to make your baby more
comfortable. 6.b
7. BACKREST ADJUSTMENT OPERATION
Pull the backrest adjustment ring with your right middle finger
and lift it up to raise the proper angle of the backrest, 7 / 7.a
Press the backrest adjustment button with your right hand
and move down to lower the backrest at an appropriate angle.
7.b
8. HANDLEBAR ADJUSTMENT GEAR OPERATION
Hold the handlebar with both hands and use the middle finger
to press the button inward and turn it up one position, 8 / 8.a
Hold the handlebar with both hands and use the middle finger
to press the button inward and turn it down one position, 8.b
Note: The handlebar has three- position adjustment (one file
up, one file down, one file in the middle)
EN
19