E-Bench KH 969 Manual De Instrucciones página 16

KH969_BA_D*F*NL*GR... 06.03.2003
Compact Disc
• Playing compact disks / start
Note: If skipping of tracks occurs when you play a CD, try turning the volume down. Under no circumstances open the CD compartment
whilst the CD is in play mode.
1. To open the CD compartment, lift the cd door (4). Insert a CD into the CD compartment and close the cd door (4) again. Set the function switch (1)
to the "CD" position.
2. When the CD compartment is closed following the insertion of a CD, the cd led display (13) shows the total number of tracks on the CD,
and then the drive stops.
3. When the CD compartment is open or empty, the cd led display (13) shows "00" and then the drive stops.
• Play/pause
1. After pressing the play/pause button (12) in "STOP" mode, the first track on the CD will be played. The play/pause led display (14) lights up.
The cd led display (13) shows the number of the track currently being played.
2. Press the cd play/pause button (12) once for a temporary pause in playing. The LED display indicating play/ pause (14) flashes.
3. Playing is paused but the CD spins faster. A further press on the cd play/pause button (12) continues play from a previous pause.
4. Pressing once on the cd stop button (11) in PLAY or PAUSE mode stops play mode.
• Repeat
1. To repeat a track:
Pressing the repeat button (10) once causes the repeat led display (15) to light up and flash continuously. The relevant piece of music is repeated.
2. To repeat all the tracks:
Pressing the repeat button (10) twice causes the repeat led display (15) to light up continuously. The whole CD is then played again.
3. To cancel the repeat function:
Press the repeat button (10) until the repeat led display (15) is turned off.
12:13 Uhr Seite 14
GB
14