Assembly With The Fine Mesh Filter Accessory Or Sorbets Accessory (If Included); Use - Imetec N5901 Instrucciones De Uso

ASSEMBLY WITH THE FINE MESH FILTER ACCESSORY OR
SORBETS ACCESSORY (IF INCLUDED)
ATTENTION!
Insert the rubber lever that prevents the pulp from leaking into the opening in
the lower part of the juice container [Fig. B] ensuring it is correctly engaged over
the pawl.
• Insert the drip cap on the dispensing nozzle [Fig. C].
• Insert the container onto the hooks [Fig. D] and turn it anticlockwise until it clicks
[Fig. E].
• Insert the fine mesh filter inside the mixer drum [Fig. F].
Note: should you choose to use the accessory for sorbets and sauces this operation
must not be performed.
• Insert the filter with the drum, or the accessory for sorbets and sauces into the juicing
container, aligning the notch on the filter with the triangle on the juicing container
[Fig. G].
• Insert the auger by pressing and gently turning completely until a click is heard
[Fig. H]. Note: the cover cannot be fitted on if the auger is not completely inserted in
position.
• Place the hopper on the juicing container, aligning the open lock icon with the arrow
on the juicing container [Fig. I]. Turn the hopper clockwise to align the closed lock
icon with the arrow on the juicing container [Fig. L].
• Place the juice container in front of the dispensing nozzle and the pulp container in
front of the pulp outlet.
WARNING! Wash the parts that come in contact with food
before using them.
WARNING!
signs of damage.
WARNING!
WARNING!
WARNING!
to the on/off switch.

USE

DO NOT use this appliance if there are visible
DO NOT touch the moving parts.
DO NOT use the appliance empty.
DO NOT use the safety system as an alternative
EN
19