Publicidad
Idiomas disponibles
Idiomas disponibles
Section 4
Attach SRHT Attach Brackets
Step 1
Inside front edge of Hard Top
Remove
Step 1
Remove Hardtop Latch Receiver Screws
and retain for future Hardtop installation.
P7 - 52460 Rev F 0421
Hardware
Screw,M8 X 1.25 X 25.0
Part #598.93
Qty. 2
M8 Washer
Part #603.26
Qty. 2
Screw, M6 X 1.00 X 20
Part #517.48
Qty. 2
Bracket, Halo Center
Part #597.18
Qty. 1
Tools
4mm
T40
Allen Wrench
Torx Driver
Installation Instructions - Sunrider for Hardtop
Step 2
1
Step 2
1
Align the Halo Center Bracket to the Hard Top
then attach it with two (2) (Part # 517.48)
Screws.
2
Attach the Center Halo Bracket to the Sunrider
using two (2) (Part #598.93) Screws and two (2)
(Part # 603.26) washers.
Page 7
2
© 2021 Bestop, Inc.
Publicidad
