Black+Decker GSL200 Manual Del Usuario página 4

ENGLISH
Intended use
Your BLACK+DECKER™ GSL200, GSL300, GSL360,
GSL700 shear/trimmer has been designed for trimming grass,
hedges, shrubs and brambles. This tool is intended for
consumer use only.
Your BLACK+DECKER charger has been designed for
charging BLACK+DECKER batteries of the type supplied with
this tool.
Safety instructions
General power tool safety
warnings
@
Warning! Read all safety
warnings and all instructions.
Failure to follow the warnings and
instructions listed below may result
in electric shock, fire and/or
serious injury.
Save all warnings and
instructions for future reference.
The term "power tool" in all of the
warnings listed below refers to your
mains operated (corded) power tool or
battery operated (cordless) power tool.
1. Work area safety
a. Keep work area clean and well lit.
Cluttered or dark areas invite
accidents.
b. Do not operate power tools in
explosive atmospheres, such as in
the presence of flammable liquids,
gases or dust. Power tools create
sparks which may ignite the dust or
fumes.
c. Keep children and bystanders away
while operating a power tool.
4
(Original instructions)
Distractions can cause you to lose
control.
2. Electrical safety
a. Power tool plugs must match the
outlet. Never modify the plug in any
way. Do not use any adapter plugs
with earthed (grounded) power
tools. Unmodified plugs and matching
outlets will reduce risk of electric
shock.
b. Avoid body contact with earthed or
grounded surfaces such as pipes,
radiators, ranges and refrigerators.
There is an increased risk of electric
shock if your body is earthed or
grounded.
c. Do not expose power tools to rain
or wet conditions. Water entering a
power tool will increase the risk of
electric shock.
d. Do not abuse the cord. Never use
the cord for carrying, pulling or
unplugging the power tool. Keep
cord away from heat, oil, sharp
edges or moving parts. Damaged or
entangled cords increase the risk of
electric shock.
e. When operating a power tool
outdoors, use an extension cord
suitable for outdoor use. Use of a
cord suitable for outdoor use reduces
the risk of electric shock.
f. If operating a power tool in a damp
location is unavoidable, use a
residual current device (RCD)
protected supply. Use of an RCD
reduces the risk of electric shock.