Component List; Technical Data - Worx WT626 Manual Del Usuario

power tool's operation. If damaged, have
the power tool repaired before use. Many
accidents are caused by poorly maintained power
tools.
f) Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges
are less likely to bind and are easier to control.
g) Use the power tool, accessories and
tool bits etc. in accordance with these
instructions, taking into account the
working conditions and the work to be
performed. Use of the power tool for operations
different from those intended could result in a
hazardous situation.
h) Keep handles and grasping surfaces dry,
clean and free from oil and grease. Slippery
handles and grasping surfaces do not allow
for safe handling and control of the tool in
unexpected situations.
5) Service
a) Have your power tool serviced by a
qualified repair person using only identical
replacement parts. This will ensure that the
safety of the power tool is maintained.
SYMBOLS
To reduce the risk of injury, user
must read instruction manual
Double insulation
Warning
Wear ear protection
Wear eye protection
Wear dust mask
Finishing Sander
Waste electrical products must not
be disposed of with household
waste. Please recycle where
facilities exist. Check with your local
authorities or retailer for recycling
advice.

COMPONENT LIST

1. SLIDING ON-OFF SWITCH
2. SOFT GRIP HANDLE
3. DUST BOX*
4. DUST EXTRACTION OUTLET
5. CLAMP LEVER
6. CLAMP LEVER LOCK
7. BASE PLATE
8. SANDING PAPER CLAMP
9. VARIABLE SPEED CONTROL
10. PAPER PUNCH*
11. DUST EXTRACTION ADAPTER
(A: INNER DIAMETER 35mm B:
INNER DIAMETER 32mm)*
12. SANDING PAPER* (See Fig. A1)
* Not all the accessories illustrated
or described are included in standard
delivery.

TECHNICAL DATA

Type WT626 (626 designation of
machinery, representative of finishing
sander)
Voltage
Power Input
No-load speed
Base size
Orbital diameter
Protection class
230-240 V~50 Hz
270 W
6000-12000 /min
90x187 mm
1.6 mm
/ll
EN
7