SPECIFICATIONS
Active 'A' Models
Woofer
Tweeter
Amplifier (watts)
Inputs & Outputs
Frequency response
(-10dB point)
Indicators
Battery Full
Charging LED
Power LED
Appearance
Handle
Mount standable
Floor monitor version
Built-In limiter
Protection circuitry
Built-In Battery
Recharging time
Battery life
Power Requirement
Dimensions (HxWxD)
Weight
Passive 'P' Models
Power Handling
Woofer
Tweeter
Frequency
response
(-10dB point)
Appearance
Handle
Flying points
Mount standable
Floor monitor version
Dimensions (HxWxD)
Weight
Sound Ambassador 40A / 40P / 80A / 80P / 125A / 125P
Sound Ambassador 80A & 125A
10"
1" dome driver
SA80A:75 Watt @ 4 ohm; 50 Watt @ 8 ohm
SA125A:120 Watt @ 4 ohm; 80 Watt @ 8 ohm
2x 1/4" for line in and out; 1x 1/4" for speaker
parallel out
18Hz~20 kHz
Green
Red (flashing)
Blue
on top
35mm tripod stand socket
Yes
Yes
thermal, subsonic, RF protection, Output DC
offset, Power on/off muting and HF driver
protection
2x 12V/4�5Ah
8 hours
4-8 hours continuous use
100-240VAC, 50/60Hz, or 2x battery power,
or external 24-32VDC power
24"x11�8"x13�8" (612x300x350 mm)
39�6 lbs (18kg), including battery
Sound Ambassador 80P & 125P
SA80P: 75 watts RMS; 150 watts Program
SA125P: 120 watts RMS; 240 watts Program
10"
1" driver
50Hz~18KHz
on top
2
35mm tripod stand socket
Yes
24"x11�8"x13�8" (612x300x350 mm)
26�5 lbs (12 kg)
Sound Ambassador 40A
6�5" full range
N/A
35 Watt @ 4 ohm; 25 Watt @ 8 ohms
2x 1/4" for line in and out; 1x 1/4" for
speaker serial out
60Hz~18 kHz
Green
Red (flashing)
Blue
on top
25mm tripod stand socket
na
Yes
thermal, subsonic, RF protection, Output
DC offset, Power on/off muting and HF
driver protection
1x 12V/2�7Ah
6-8 hours
2-4 hours continuous use
100-240VAC, 50/60Hz, or battery
power, or external 24-32VDC power
13�2" x 8�7" x 8�5" (336x220x216 mm)
Less than 14�3 lbs (6�5Kg), including
battery
Sound Ambassador 40P
20 watts RMS; 40 watts Program
6�5" full range
N/A
60Hz~18KHz
on top
N/A
25mm tripod stand socket
NA
13�2" x 8�7" x 8�5" (336x220x216 mm)
8�8 lbs (4 kg)
7