Haier HLP0R02AXW Instrucciones De Instalación página 10

3. Using the 2 screws and 2 star washers (provided), fasten the dryer to the
mounting brackets. Do not completely tighten screws.
m i
4. Using 2 people, tip the dryer back enough to expose the double-sided tape on
the stand.
5. Remove the paper liner from the double-sided tape.
NOTE: The bottom of the dryer will adhere to the tape, so you need to make sure
the dryer is in the correct position before lowering it onto the tape.
a
6. Make sure the dryer is flush against the mounting brackets, and then slowly
lower the dryer onto the double sided tape.
7. Completely tighten the 2 screws used to fasten the dryer to the mounting
brackets.
8
a
Mounting Brackets
#8 Phillips-head Screw
Star Washer
Double-Sided Tape