Operation - N'DUSTRIO LP302 Instrucciones Para Uso Y Mantenimiento

EN
page 32
On the "G" display the
The button "A" will light in white for a few seconds, while loading the software. After
loading is complete, the button will light in red.
reading HEATING
the set temperatures. During this process, the machine will not allow any cycle selection
or start
power, the "A" button will light in green after some 20 min.
FILLING WATER
OFF
2.2.2

Operation

Release the key when the selected program is selected.
To start the selected cycle press the
BOILER
85 C
CYCLE 1 (3 min)
CYCLE 2 (6 MIN)
CYCLE 3 (9 MIN)
CYCLE 4 (12 MIN)
CYCLE SELECTION
OFF
temperature.
Below the temperatures indications line-bar is displayed to show the progression of the
wash-cycle.
At the end of the washing cycle, a hot rinse cycle will take place
boiler 85 C
CYCLE 1 (3 MIN)
WASH
OFF
"STAND-BY" message will be off.
.". The reading will stay until both boiler and wash-tank will reach
OFF
"A" key.
"G" display will turn blue.
TANK
57 C
"A" will indicate the
TANK 57 C
2 %
"G" will read "FILLING
HEATING
"C" and "D" or by keeping pressed the
"CYCLE ENDED".
WATER".