EN
page 34
2.3
Detergent use
The machine can be equipped with the detergent dispenser. If provided, the machine will
automatically take the needed detergent amount
The detergent shall be the NO FOAM type, suitable for industrial dishwashers and must
comply with the EN 60335-2-58/A11 norms.
The use of good quality liquid detergents is recommended.
Follow the manufacturer's recommendations for chemical dosage, related to the local water
hardness. 1cm. of the product drawn into the tube is equal to about 0.15 g. A correct amount
of detergent is very important for a successful wash.
Should the detergent lack, the display will show
BOILER
85 C
CYCLE 1 (3 MIN)
CYCLE 2 (6 MIN)
CYCLE 3 (9 MIN)
CYCLE 4 (12 MIN)
detergent level
CYCLE SELECTION
OFF
2.4
Rinse aid use
The machine has a standard rinse aid dispenser. The machine automatically sucks the
product.
The rinse-aid chemical, shall be suitable for professional glass and dishwashers and must
comply with the EN 60335-2-58/A11 norms.
The recommended amount is 3-6 cm of product measured on the suction hose.
1 cm of the product drawn into the hose is equal to about 0.13g. A correct amount of rinse
aid is very important for a quick and proper drying.
NB:
Should the detergent lack, the display will show
85 C
boiler
CYCLE 1 (3 MIN)
CYCLE 2 (6 MIN)
CYCLE 3 (9 MIN)
CYCLE 4 (12 MIN)
rinse aid level
OFF
CYCLE SELECTION
2.5
Drain pump system (optional)
The machine can be equipped with discharge pump.
Press the key
"E"
till the display will show
The Drain pump will automatically drain the wash-tank.
During the drain process, the button
"DETERGENT LEVEL"
TANK
57 C
TANK
57 C
"DRAIN THE
"A"
(only with optional
"RINSE-AID LEVEL"
(only with optional
SUMP".