Repair And Maintenance; Battery Maintenance - Gima M34266 Manual De Uso Y Mantenimiento

Note:
- The charger will stop charging automatically when the coin cell is full
(the indicator becomes green). Moreover, it has over heat protection
function, when the coin cell temperature is higher than 45°C, it will also
stop charging automatically.
- The charger can be connected to the USB port of a computer by the
charger cable for charging.

8. Repair and Maintenance

A. Please charge the battery when the low-voltage indicator lightens.
B. Please clean the surface of the device before using. Wipe the device
with alcohol first, and then let it dry in air or wipe it dry.
C. Please take out the battery if the oximeter will not be used for a long time.
D. The best storage environment of the device is -20ºC to 55ºC ambient
temperature and less than 95% relative humidity.
High-pressure sterilization cannot be used on the device.
Do not immerse the device in liquid.
It is recommended that the device should be kept in a dry
environment. Humidity may reduce the useful life of the device,
or even damage it.

8.1 Battery Maintenance

Keep the both sides of coin cell clean.
- Low temperature may decrease the performance of coin cell, and low
battery indicator may appear early. In such case, please put coin cell into
pocket for warm before use, thus bring it back to normal condition.
- Do not let any conductive metal (such as tweezers) contact both sides
of coin cell simultaneously to avoid short circuit.
- Charge the coin cell for 8~10 hours each time; ambient temperature
should be 5°C~40°C.
- If the coin cell is full after charging, but its performance decreases
apparently, it means the coin cell is exhausted, please change a new one.
ENGLISH 24