Indicator Lights - McQuay IM-WMX-0603 Manual De Instalación

IR signal receiver
When an infrared remote control operating signal has
been transmitted, the signal receiver on the indoor unit
will make a <beep> sound to confirm acceptance of the
signal transmission.
LED Indicator Lights : Normal Operation And Fault Conditions For Cooling Unit
ON

INDICATOR LIGHTS

LED Indicator Lights
Operation / Fault Indication
Timer on.
Sleep mode on.
Dry mode.
Compressor overload protection.
Indoor temperature sensors contact loose / short.
Outdoor temperature & current sensors contact loose / short.
Gas leak / compressor overhead.
Communication error between indoor and outdoor.
Inverter error / PFC error.
Outdoor total current trip / DC peak.
Indoor fan feedback error.
ON or OFF
1-8
Inverter Cooling unit
The table shows the LED indicator lights for the air
conditioner unit under normal operation and fault conditions.
The LED indicator lights are located at the bottom right
side of the air conditioner unit.
LED Indicator Lights for Cooling Unit
Timer
Sleep mode
Power ON
Dry mode
Action
–
–
–
Call your dealer
Call your dealer
Call your dealer
Call your dealer
Call your dealer
Call your dealer
Call your dealer
Call your dealer
Blinking