Setting The Time - Eterna KonTiki - Date Manual Del Usuario

are wearing the watch. It is therefore not normally neces-
sary to manually wind the watch. However, if your watch
should stop, simply turn the crown
clockwise to restart it. When fully wound, your watch has
a power reserve of approximately 38 hours.
NOTE
There is no end of winding stop. A protective
mechanism prevents excessive winding of the
movement.
2.3

SETTING THE TIME

CROWN
To set the time, pull the crown
tion C. Turn it in either direction to position the hands to
the desired time. When the hour hand passes the 12 o'clock
position, you will see whether it is indicating midnight (the
date changes) or midday (the date does not change). Check
that the date set previously has not changed. Once the
setting is complete, push the crown back in against the
case to the rest position A. The hands will restart.
NOTE
For a time setting accurate to the second, we
recommend pulling the crown out to position
when the central seconds hand
o'clock, and pushing it back in to synchronise with
an official time signal.
5 PULLED OUT TO POSITION
6 6
5 through a few turns
C
5 out two notches to posi-
3 is at precisely 12
C