Changing The Door-Opening Direction; Tools Required - Edesa CE340NF Manual De Instrucciones

CHANGING THE DOOR-OPENING DIRECTION:

TOOLS REQUIRED:

An Allen screwdriver and a screwdriver with a TORX tip.
PROCEDURE:
1. Unplug the refrigerator and take everything from the
compartment.
2. Remove the cover from the top hinge.
3. Loosen the top hinge screws.
4. Take the door off with an upward movement.
5. Remove the cover of the central hinge screws, and loosen
the two screws holding it in place.
6. With the screws loose, move the freezer
door upward to release it.
7. Finally, take out the skirting board and screws and remove
the bottom hinge.
BEFORE SWITCHING THE REFRIGERATOR ON:
Clean the inside with warm water and bicarbonate of soda. Rinse and dry
carefully.
Wait for 2 hours before starting, to ensure that the motor lubricants have
stabilised.
If the refrigerator has been switched off, wait 4 hours after restarting before
placing food inside.
8. Change the position
of the bottom hinge shaft, placing it on the
opposite side.
9. If fitted, change the lateral handles to the
other side.
10. Reverse this procedure to refit the doors.
5