Safety System; Using The Appliance - TEFAL ZE581B38 Manual De Instrucciones

CAUTION: the safety precautions are part of the appliance.
Read them carefully before using your new appliance for the
first time. Keep them in a place where you can find and refer
to them later on.
DESCRIPTION
A Pusher
B Feed tube
C Cover
D Sieve
E Juice collector
F Pouring spout with drip-stop
system
G Pulp collector
H Safety clamp

SAFETY SYSTEM

This appliance is fitted with a safety mechanism. To start the juice machine, the
cover (C) must be properly secured by the safety clamp (H). Opening the
safety clamp (H) will stop the juice machine. At the end of a cycle, place the
control switch (I) to 0 and wait until the sieve (D) stops completely before
removing the cover.
BEFORE FIRST USE
• We recommend that you wash all the removable parts (A, B,C, D, E, G, L, M, N)
in warm soapy water (see paragraph "Cleaning"). Rinse and dry them carefully.
• Unpack the appliance and place it on a solid, stable work surface.
• Ensure that all packaging has been removed before starting the appliance.

USING THE APPLIANCE

• Fit the juice collector (E) in the appliance, tipping it slightly forward to pass
the pouring spout through the hole provided (see Fig. 1).
• Place the sieve (D) in the juice collector (E). Ensure that the sieve is properly
clipped onto the drive shaft (J). You can hear an audible click when the
sieve is positioned correctly (see Fig. 2).
• Fit the cover (C) on the appliance, ejection spout to the rear (see Fig. 3).
I Control switch (2 speeds)
J Drive shaft
K Motor unit
L Juice jug cover
M Foam separator
N Juice jug
O Brush
P Cord storage
53
EN