Intended Use - Bostitch BTCN120 Traducido De Las Instrucciones Originales

Tabla de contenido

Publicidad

GB ©Bostitch. Not to be reproduced without permission. Unauthorised copies of this document do
not constitute CE compliance for the products.

Intended Use

Your cordless finish nailer has been designed for driving nails
FR ©BOSTITCH. Reproduction interdite sans permission préalable. Les copies non autorisées de
into wooden workpieces.
ce document ne signifient en rien que les produits soient conformes aux normes CE.
DO nOt use under wet conditions or in the presence of
flammable liquids or gases.
DE ©BOSTITCH. Vervielfältigung nicht ohne Genehmigung gestattet. Unzulässig erstellte Kopien
Your cordless finish nailer is a professional power tool.
dieses Dokuments erfüllen nicht die CE-Richtlinien für Produkte.
DO nOt let children come into contact with the tool.
Supervision is required when inexperienced operators use
NL ©BOSTITCH. Mag niet worden vermenigvuldigd zonder toestemming. Onrechtmatige kopieën
this tool.
van dit document willen niet zeggen dat de producten voldoen aan de CE-vereisten.
Young children and the infirm. This appliance is not
intended for use by young children or infirm persons
DK ©BOSTITCH. Må ikke gengives uden tilladelse. Uautoriserede kopier af dette dokument udgør
without supervision.
This product is not intended for use by persons (including
ikke CE overholdelse for produkterne.
children) suffering from diminished physical, sensory or
mental abilities; lack of experience, knowledge or skills
FI ©BOSTITCH. Ei saa jäljentää ilman lupaa. Tämän asiakirjan ilman valtuutusta tehdyt kopiot
unless they are supervised by a person responsible for their
eivät muodosta tuotteille CE-yhdenmukaisuutta.
safety. Children should never be left alone with this product.
ASSEMBLY AND ADJUSTMENTS
GR ©BOSTITCH. Απαγορεύεται η αναπαραγωγή χωρίς προηγούμενη άδεια. Τα μη

WARNING: To reduce the risk of serious personal
εξουσιοδοτημένα αντίγραφα του παρόντος εγγράφου δεν αποτελούν συμμόρφωση CE για
injury, turn tool off and disconnect battery pack
τα προϊόντα.
before making any adjustments or removing/
installing attachments or accessories. An accidental
IT ©BOSTITCH. Vietata la riproduzione senza permesso. Le copie non autorizzate di questo
start-up can cause injury.

documento non garantiscono la conformità CE per i relativi prodotti.
WARNING: Use only BOSTITCH battery packs
and chargers.
NO ©BOSTITCH. Skal ikke reproduseres uten tillatelse. Ikke godkjente kopier av dette
Belt Hook (Fig. A)
dokumentet oppfyller ikke kravene for CE-merking for produktet.

WARNING: Disconnect battery pack from tool before
PT ©BOSTITCH. Reprodução proibida sem autorização prévia. As cópias não autorizadas deste
making any adjustments, changing accessories,
servicing, or moving the tool. Such preventative safety
documento não estão em conformidade com a CE para os produtos.
measures reduce the risk of starting the tool accidentally.

WARNING: Remove nails from magazine before
ES ©BOSTITCH. Prohibida la reproducción sin permiso. Las copias no autorizadas de este
making any adjustments or servicing this tool. Failure
documento no suponen la conformidad con las normas CE de los productos.
to do so may result in serious injury.

CAUTION: When not in use, place tool on its side on
SE ©BOSTITCH. Prohibida la reproducción sin permiso. Las copias no autorizadas de este
a stable surface where it will not cause a tripping
documento no suponen la conformidad con las normas CE de los productos.
or falling hazard. Some tools with large battery packs
will stand upright on the battery pack but may be easily
knocked over.
PL ©BOSTITCH. Niniejszy dokument nie może być kopiowany bez pozwolenia.
The cordless nailers include an integrated belt hook and can
Nieautoryzowane kopie niniejszego dokumentu nie stanowią deklaracji zgodności CE
be attached to either side of the tool to accommodate left- or
prezentowanych produktów.
right-handed users.
If the hook is not desired at all, it can be removed from the tool.
CZ ©BOSTITCH. Niniejszy dokument nie może być kopiowany bez pozwolenia.
To Remove Belt Hook
Nieautoryzowane kopie niniejszego dokumentu nie stanowią deklaracji zgodności CE
1. Remove battery pack from tool.
prezentowanych produktów.
2. To switch the tool from right- to left-hand usage simply
remove the screw 
 19 
SK ©BOSTITCH. Rozmnožovanie bez povolenia je zakázané. Neoprávnené kópie tohto
reassemble on the other side.
dokumentu nie sú v súlade s CE pre dané výrobky.
3. Replace battery pack.
Inserting and Removing the Battery Pack
HU ©BOSTITCH. A dokumentum engedély nélkül nem sokszorosítható. Az engedély nélkül
from the Tool (Fig. B)
sokszorosított dokumentum nem jelenti a termék CE-megfelelőségét.
nOtE: Make sure your battery pack 
from the opposite side of the tool and
 14 
is fully charged.
To Install the Battery Pack into the
Tool Handle
1. Align the battery pack 
 14 
handle (Fig. B).
2. Slide it into the handle until the battery pack is firmly seated
in the tool and ensure that you hear the lock snap into place.
To Remove the Battery Pack from the Tool
1. Press the release button 
out of the tool handle.
2. Insert battery pack into the charger as described in the
charger section of this manual.
Fuel Gauge Battery Packs (Fig. B)
Some BOSTITCH battery packs include a fuel gauge which
consists of three green LED lights that indicate the level of
charge remaining in the battery pack.
To actuate the fuel gauge, press and hold the fuel gauge button.
A combination of the three green LED lights will illuminate
designating the level of charge left. When the level of charge
in the battery is below the usable limit, the fuel gauge will not
illuminate and the battery will need to be recharged.
nOtE: The fuel gauge is only an indication of the charge left on
the battery pack. It does not indicate tool functionality and is
subject to variation based on product components, temperature
and end-user application.
OPERATION
Instructions for Use

WARNING: Always observe the safety instructions and
applicable regulations.

WARNING: If the tool has been dropped or you
suspect tool damage perform tool operation check
as defined in the mode selection section of the
manual. If it does not perform according to the manual,
stop using the tool and have it serviced at an authorized
BOSTITCH Service Centre.

WARNING: To reduce the risk of serious personal
injury, turn tool off and disconnect battery pack
before making any adjustments or removing/
installing attachments or accessories. An accidental
start-up can cause injury.
Proper Hand Position (Fig. C)

WARNING: To reduce the risk of serious personal injury,
ALWAYS use proper hand position as shown.

WARNING: To reduce the risk of serious personal
injury, ALWAYS hold securely in anticipation of a
sudden reaction.
Proper hand position requires one hand on the main handle
as shown.
Preparing the Tool

WARNING: NEVER spray or in any other way apply
lubricants or cleaning solvents inside the tool. This can
seriously affect the life and performance of the tool.
EngLIsh
with the rails inside the tool's
and firmly pull the battery pack
 15 
33

Publicidad

Tabla de contenido
loading

Tabla de contenido