ARIETE Grati superior 449 Manual De Instrucciones página 11

33. To dispose of product correctly according to European Directive 2009/96/
CE, please refer to and read the provided leaflet enclosed with the product.
DO NOT THROW AWAY THESE INSTRUCTIONS
APPLIANCE DESCRIPTION (Fig. 1)
A Container
B Container lid
C ON/OFF switch
D Container locking slot
E Appliance body
F Roller shaft
Designed to grate any kind of hard cheese and not too soft one, GRATI' can also grate stale bread,
almonds, walnuts, etc.
APPLIANCE ASSEMBLY
ATTENTION: Before using the appliance, it is recommended to wash all removable parts that
will be in contact with food using water and common dish detergent.
- With raised handle (G), insert the hopper unit (I) into the shaft (F) of the appliance body (E) (Fig. 2).
- Lock the hopper unit (I) by rotating it anticlockwise, until the hopper pin locks in place in the appli-
ance body (E) (Fig. 3).
- Let the roller (L) slide along the hopper (I) and insert it into the shaft (F) (Fig. 4).
- Mount the lid (M) to the hopper (I) and lock it by rotating it anticlockwise (Fig. 5).
- Insert the container (A), without the lid (B), under the hopper unit (I) by making its side flaps slide
into the appropriate slot (D) onto the appliance body and on the roller lid (M) (Fig. 6). Press the
container (A) until it locks in place.
WARNING:
If the container is not properly inserted into the slot (D), it is not possible to push it under the
hopper. In this case, do not continue to press strongly to prevent the container from breaking.
Remove and insert it properly.
Insert the hopper (I) with the lever (H) raised to allow proper locking of the related pin.
Make sure all components are properly mounted before use, otherwise the appliance does
not run.
G Handle
H Lever
I Hopper unit
L Roller for grating
M Roller cover
N Brush
- 9 -
EN