Inateck FE2010 Manual De Instrucciones página 3

Hard drive installation steps Picture
a. Push the 2.5" enclosure laterally. (push the two parts into
the opposite direction)
b. Put the hard disk into enclosure, align it with SATA
interface inside the enclosure
c. Push upwards, till the enclosure close completely
d. Connect enclosure with computer via USB cable
Specifications
Product name
Product type
material
Weight
Color
Supported drives interface
Maximum height of drives
Hot plug，plug&play
Licenses
Measurements
Supported OS
Ultra slim 2.5 Inch HDD Enclosure
Inateck FE2010
ABS plastic
68g
black
SATAIII/II/I
Height of up to 9.5mm HDD/SSD supported
supported
CE，FCC
130x82x14mm
Windows XP/7/8/10；Mac9.0 or above