Maxon ME2 C1 Instrucciones página 8

12. Install sensors, camera and brackets
in the backup bar with cap screws (Kit
items) and nuts (Kit items) (FIG. 8-1).
Then insert nylon plugs (Kit Items) as
shown in FIG. 8-1.
13. Secure wiring harness in backup bar
with plastic ties (Kit items).
14. Replace cover on mainframe (FIG.
8-2).
15. Reconnect ground (-) battery cable to
vehicle battery.
LIFT CORPORATION Sht. 8 of 16 DSG#
NYLON PLUG
SENSOR & BRACKET
(4 PLACES)
BACKUP BAR
1/4"-20 CAP SCREW
(10 PLACES)
COVER
M-16-27
Rev. A Date: 03/03/17
1/4"-20 NUT
(10 PLACES)
CAMERA & BRACKET
INSTALLING BRACKETS
FIG. 8-1
REPLACING COVER
FIG. 8-2