Automatic Programs ; Program Selection - Concept SO4000 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 38
EN
• Do not immerse the power cord or the charger in water or any other liquid.
• Check the appliance and the power cord for damage regularly. Do not switch on the appliance if it has
been damaged.
• Switch off the appliance after use and prior to cleaning.
• If smoke occurs, switch off the appliance and unplug the power cord. Leave the cover lid on the appliance
to prevent possible spread of fire.
• Do not repair the appliance yourself. Contact an authorized service centre.
• The maximum recommended operating time must not exceed 40 hours.
• We recommend using the dryer with 5 trays even though some of them remain empty.
• This appliance can be used by children aged from 8 years and above if they have been given supervision or
instruction concerning the use of the appliance in a safe way and understand the hazards involved. Clea-
ning and user maintenance shall not be made by children unless they are older than 8 years and supervi-
sed. Children under the age of 8 must be kept away from the appliance and its power cord. Children shall
not play with the appliance.
If you fail to follow these instructions, any possible repair cannot be recognized as a warranty repair.
POPIS VÝROBKU
1.
Appliance body
2.
Drying screens
3.
Display
4.
Controller
1
2
44
3
4
SO4000
USER MANUAL
Connect the power cord. The dryer turns on: a beep sound will
occur and all the lights will be on, then they will go out and the
display will stay unlit. Press the middle button. A short beep sound
will occur and the red back lightning will be on. At this point, the
appliance is in a standby mode.
AUTOMATIC PROGRAMS - pre-sets of these programs cannot
be edited.

PROGRAM SELECTION

DRYING MEAT (the appliance uses an infrared light).
Turn the button to the meat icon
. The icon will light up. Press the button and the dryer will start ope-
rating automatically. The pre-set temperature of 75 °C and time of 8 hours will be displayed on the screen. At
the same time, the infrared light and the dedicated IR indicator will light up. (if the red back lightning is on, it
means the infrared radiation is in operation.) The program is now operating.
If you want to select another program, turn the button to the desired position. The dedicated icon will light
up. Press the control button inward to confirm your selection. The dryer will now start operating in the
newly selected program. If you just turn the button and do not confirm the newly selected program within
10 seconds, the previous selected program will continue. When the program has finished and the time has
elapsed, the appliance automatically switches to KEEP WARM mode for 24 hours unless it is not turned off.
This temperature is lower than the temperature of the program. The screen will light up green. After 24 hours
the dryer switches off automatically.
DRYING FRUIT (program without infrared light)
Turn the button to the fruit icon
The dedicated icon will light up. Press the button and the dryer will
start operating automatically. The pre-set temperature of 65 °C and time of 16 hours will be displayed on the
screen. A green HEATER indicator will light up. (green back lightning means drying without use of the infrared
light).
If you want to select another program, turn the button to the desired position. The dedicated icon will light
up. Press the control button inward to confirm your selection. The dryer will now start operating in the
newly selected program. If you just turn the button and do not confirm the newly selected program within
10 seconds, the previous selected program will continue. When the program has finished and the time has
elapsed, the appliance automatically switches to KEEP WARM mode for 24 hours unless it is not turned off.
This temperature is lower than the temperature of the program. The screen will light up green. After 24 hours
the dryer switches off automatically.
SO4000
EN
45

Publicidad

Tabla de contenido
loading

Tabla de contenido