Connect Ductwork - Broan Best IEX170 Manual De Instrucciones

INSTALLATION OF GLASS
FRAME
(Optional)
1. Fit the glass frame above the hood.
2. Attach the (3) supplied brackets to the
hood.
3. Fit the supplied adhesive pads on the glass
frame in correspondence to its mounting
screws in order to prevent the glass from
breaking.
4. Adjust the position of the glass frame and
attach it with the mounting screws
(M4x20mm).
Please be very careful not to hit the glass
with any objects made of porcelain, metal,
glass or anything else that is very heavy.
SUPPLIED
BRACKETS

CONNECT DUCTWORK

1. Position the hood near the lower part of
the support frame and connect the duct to
the discharge collar.
2. Use 8" round metal duct to connect the
discharge collar on the hood to the
ductwork above.
3. Use duct tape to make all joints secure and
air tight.
MOUNTING SCREWS (M4x20mm)
ADHESIVE
PADS
DISCHARGE COLLAR
- 7 -
GLASS FRAME
8" DUCT