Weekly Activation - Jacuzzi Mood S Manual De Uso Y Mantenimiento

To turn off the function, press the
key for a few seconds (the display of
the day and time will disappear).
The function can also be
turned off by turning on the
sauna in manual mode
activation
To select a time of 12 hours, the
maximum time of use must be set
to this value during installation
(see the installation manual)
Then set the day and time you want the heater to turn on; then select the type of sauna
(there is only one selection for bio sauna models).
26
20:51
10:--
20:51
To finish, set the desired temperature and percentage of humidity (the latter only for
models with bio sauna); at the end of programming, the "on" day and time will flash in the
lower right corner of the display (when in stand-by mode).
---------------
-----------
55°
20:51
Weekly
First select the menu relative to weekly programming: a series of numbered boxes will
appear that indicate the days of the week (1=Monday, 2=Tuesday, etc.).
Once the desired day is selected, a screen appears where you can store the number of
daily activations (up to 4 per day of the week).
The maximum period of time that can be assigned to each programme is 12
hours; if this value is selected, there must be a 6 hour pause between activa-
tions. Therefore, if a programme lasts 12 hours, the next one must be set so
that it starts 6 hours later; if you want to shorten this wait time, programme a
shorter duration.
42
15/--/-- 15/07/--
20:51
10:30
20:51
---------------
26
-----------
14%
20:51
15/07/15
20:51 20:51
20:51 20:51
15.07
10:30
20:51 20:51
15.07
10:30