Publicidad
Idiomas disponibles
Idiomas disponibles
Optional Horizontal Adjustment of Wall Arm on Wall Plate
NOTE: If mounting wall arm assembly (A) to wood stud wall surface, slots on wall plate must align to studs.
1
Loosen four 1/4-20 x 17 mm screws using 5 mm allen wrench. Slide wall arm assembly 4.5" to the left or right as
shown in figure 1.1.
NOTE: Align bevels (dots) of slide plate with bevels (dots) of wall plate rails as shown in detail 1 then retighten
1/4-20 x 17 mm screws. Do not adjust arm while screen is attached.
1/4-20 x 17 MM SCREWS
WALL ARM
fig. 1.1
WALL PLATE
4 of 32
WALL PLATE RAIL
DETAIL 1
ISSUED: 03-30-10 SHEET #: 095-9346-1
SLIDE PLATE
Publicidad
