Publicidad
Idiomas disponibles
Idiomas disponibles
• Do not lift more weight than you can handle. Use additional man power or mechanical lifting equipment to safely
handle placement of the screen.
• Do not tighten screws with excessive force. Overtightening can cause damage to mount. Tighten M10 x 15 mm
screws (E) to 40 in. • lb (4.52 N.M.) maximum torque.
Mounting Flat Panel Screen
NOTE: Refer to PLP model instruction sheet for attachment of dedicated PLP plate to screen. Install two M10 x 15
4
mm screws (provided with dedicated PLP plate) into top two holes of dedicated PLP plate leaving 1/4" of exposed
thread as shown in figure 4.1.
Insert two M10 x 15 mm screws (E) into bottom holes of adapter plate as shown in figure 4.2. Tighten all fasteners
4-1
with 6 mm allen wrench (H).
ADAPTER PLATE
DEDICATED PLP PLATE
ADAPTER PLATE
DEDICATED PLP PLATE
WARNING
M10 x 15 MM SCREW
fig. 4.1
fig. 4.2
7 of 32
1/4"
E
ISSUED: 03-30-10 SHEET #: 095-9346-1
Publicidad
